SP Vacuum Brake Bleeder - 4 Litre
Description
Air Pressure: Min 550Kpa (80psi), Max 900Kpa (130psi)
Air Consumption: Max 180L/min 10CFM at 100psi
Vacuum: 23InHg at 100psi
Fitting: 1/4 BSP (not Included)
Container capacity: 800ml (1.7pint)
VACUUM BRAKE BLEEDER FEATURES & BENEFITS
Large 4L capacity collection container
Quickly dispose of waste fluid via small remote cap
Storage point for bleeder fitting prevents fluidleakage from hose when not in use
High efficiency vacuum generator
High quality quick-release coupler
Overflow shut-off valve
Locking air trigger
INSTRUCTIONS
Drain old fluid from brake master cylinderreservoir and top up with new fluid
Begin bleeding procedure on the wheel(s)furthest from the master cylinder
Connect rubber bleeder fitting to the calliperbleed nipple and open nipple 1/4” turn only
Operate brake bleeder and allow fluid to flowuntil clear fluid is seen in tube
Close off bleed nipple
Top off fluid level
Repeat procedure on each wheel
IMPORTANT: AT THE COMPLETION OF BLEEDING, CHECK FOR FIRM BRAKE PEDAL
