- Home /
- Tools & Engineering /
- Drill Bits & Holesaws /
- Drill Bits /
- Alpha Gold Series Jobber Drill Metric
Products
-
Agricultural
-
Consumables & Accessories
- Accessories
- Adhesive & Silicones
- Anchors
- Auto Chargers, Batteries and Accessories
- Bars & Chains
- Brass Fittings
- Cable Ties
- Chainsaws
- Cleaners
- Consumables
- CRC
- Cutting & Grinding
- Disposable
- Drill Bits & Holesaws
- Ear Protection
- Eye Protection
- Fasteners & Adhesives
- Footwear
- Generators
- Grease
- Hand Tools
- Hose Clamps
- Lawnmowers
- Lights & Beacons
- Lubricants
- Nuts, Bolts & Washers
- Oils & Cans
- Paints
- Power Tools
- Pressure Washers & Pumps
- Respiratory Protection
- Ride-Ons
- Sanding
- Soldering & Brazing
- Sprayers
- Tapes
- Taps & Dies
- Tiedowns & Restraints
- Trimmer & Brushcutters
- Welding Consumables
- Welding Protection - Person
- Wire Brushes
- Workwear
-
Forestry & Landscaping
- Gift Vouchers
-
Oils & Lubrication
-
Outdoor Power Equipment
- Accessories
- Air Tools & Compressors
- Auto Chargers, Batteries and Accessories
- Bars & Chains
- Blowers
- Chainsaws
- Chippers
- Cleaners
- Cultivators
- Cutting & Grinding
- Edger
- Equipment
- Generators
- Hand Tools
- Hedgetrimmers
- Lawnmowers
- Log Splitters
- Multitools
- Oils & Cans
- Pole Saws
- Post Hole Borers, Augers & Drills
- Pressure Washers & Pumps
- Ride-Ons
- Sprayers
- Trimmer & Brushcutters
-
Safety
- Cleaners
- Disposable
- Ear Protection
- Eye Protection
- Fire Extinguishers
- Footwear
- Hand Protection
- Head Protection
- Hearing Protection
- Hedgetrimmers
- Height Safety
- Hi Viz & Day/Night
- Lifting Equipment
- Lights & Beacons
- Overalls and Dustcoats
- Pins & Couplers
- Protection
- Rainwear
- Respiratory Protection
- Safety
- Safety Wear
- Signs & Stickers
- Site Safety
- Tapes
- Warning Tapes & Bunting
- Welding Equipment
- Welding Protection - Person
- Workplace Safety
- Workwear
-
Tools & Engineering
- Accessories
- Adhesive & Silicones
- Air Tools & Compressors
- Anchors
- Auto Chargers, Batteries and Accessories
- Brass Fittings
- Cable Ties
- Cleaners
- Consumables
- Cordless Power Tools
- CRC
- Cutting & Grinding
- Cutting & Tapping Tools
- Drill Bits & Holesaws
- Drill, Driver & Wrench Accessories
- Fans & Ventilation
- Fasteners & Adhesives
- Gas Equipment
- Grease
- Grinding Machines & Accessories
- Hand Protection
-
Hand Tools
- Accessories
- Air Tools
- Axes
- Batteries
- Battery Chargers & Jumpers
- Bits
- Blow Torches & Accessories
- Chisels
- Clamps
- Cleaners
- Cutters
- Drills
- Files & Accessories
- Garden Tools
- Grease Guns & Accessories
- Hammers
- Hand Wire Brushes
- Hex Keys
- Impact Tools
- Magnets
- Measuring & Testing Tools
- Oil
- Oil-Fuel Transfer Equipment
- Pick Up & Inspection
- Picks
- Pliers
- Precision Measurement
- Pry Bars
- Pullers & Sets
- Punches
- Ratchets
- Riveters & Accessories
- Saws
- Screwdrivers
- Side Discharge
- Sockets
- Spanners
- Specialised
- Speciality Tools
- Tool Belts
- Tool Chests
- Tools Sets
- Wrenches
- Hose Clamps
- Lifting Equipment
- Lights & Beacons
- Lubricants
- Multitools
- Nuts, Bolts & Washers
- Oils & Cans
- Power Tools
- Rope, Chain & Wire
- Sanding
- Seals & Bearings
- Shackles & Links
- Soldering & Brazing
- Tapes
- Taps & Dies
- Tiedowns & Restraints
- Welding Consumables
- Welding Equipment
- Welding Machines
- Welding Protection - Person
- Welding Protection - Workspace
- Wire Brushes
- Workplace Safety
- Workshop Tools
-
Welding
-
Workwear
Alpha Gold Series Jobber Drill Metric
Description
Alpha Gold Series 2.5mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 3.0mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 3.5mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 5.0mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 5.5mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 6.0mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 6.5mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 7.0mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 7.5mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 8.0mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 8.5mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 9.0mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Alpha Gold Series 9.5mm Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? or do you actually want HOLES?
Rigorous independent testing has proven that the Gold Series Drills outperform other Australian drills on the market by more than 30% - giving you more holes for your dollar in every single drill bit!
The Alpha Carded Gold series Drills boast the highest quality M2 HSS jobber drill!
DRILL FEATURES
• M2 HSS Fully ground M2 HSS material increases drill life
• Titanium Nitride coating reduces heat and increases lubricity for extended life
• 135º Split Point cuts faster and reduces wandering
Alpha Gold Series Drills are packaged in a reusable plastic hang pack, keeping your drills safe, clean and dry.
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use :
• Clamp the work piece securely
• Select the correct speed and feed
• Use an appropriate coolant or lubricant
• Ensure the shank is securely held. Aviod using worn drill chucks as the drill may slip during use.
• Regrind the point or replace the drill before it dulls, do not force a worn drill.
• When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
