Come in and see us at 20 King Street East, Te Kuiti and 10 Wahanui Crescent, Otorohanga

High Five Blue Nitrile Disposable Glove

High Five Blue Nitrile Disposable Glove

Stock Code:
MDN-2XL
Stock Code:
MDN-L
Stock Code:
MDN-XL
$28.50
$28.50
$28.50
Stock Level
In Stock
In Stock
In Stock
In Stock

Add To Cart

Unavailable for Online Purchase: Contact store for availability
Unavailable for Online Purchase: Contact store for availability
Unavailable for Online Purchase: Contact store for availability
Add to Favourites
Add to Favourites
Add to Favourites
(0 reviews)

Description

Features:
Non latex, powder-free high quality nitrile rubber, tailored fit
Industrial/medical grade, FDA approved
Paint, silicone, oil and abrasion resistant
Textured fingertips for advanced grip
24cm cuff length
4mil thickness
Superior puncture and abrasion resistance
Latex free, 100% Nitrile
100pc/box
Sizes S–2XL

Uses:
Industrial
Laboratory
Automotive
Medical
Cleaning
Printing
Painting

Certifications:

EN 420:03+A1:09
General requirements for protective gloves.

EN 1186
Glass/fork symbol gives traceability and identification of materials intended to come into contact with food. Confirms that these products will not contaminate food with hazardous substances.

EN 455-2
Defines requirements for sizing and strength of disposable gloves for medical use.

EN 455-3
Defines requirements for biological evaluation of disposable gloves to check that irritancy and powdering is within limits for medical use.

FDA 21
Overarching regulations for production, testing, labelling and advertising of food and drugs within the United States.

CFR 177.2600
Rubber articles intended for repeated use—lists permitted elastomers, vulcanization materials, accelerators, retarders, activators, antioxidants, plasticizers, fillers, emulsifiers, and other additives, and sets extraction limits for food contact.

EN 374-1
Indicates that the product meets permeation standards for protective gloves, with permeation resistance of (Type A) at least 30 minutes to 6 test chemicals, (Type B) at least 30 minutes to 3 chemicals and (Type C) at least 10 minutes to 1 chemical. Letters under the shield identify the chemicals.

EN 374-2
Indicates that the product meets penetration standards for protective gloves, against penetration by dangerous chemicals and micro-organisms. A sample glove shall not leak water or air when tested for closures, porosity, seams, pinholes, leaks or imperfections of the glove by either inflating with air or filling with water.

EN 374-4
Measures the glove’s resistance to degradation by chemical exposure—any flaking, swelling, disintegration, embrittlement, hardening, softening, etc—by testing the force required to puncture the glove material after continuous contact with a challenge chemical.

EN 374-5
Tests the glove for safety in risks of contact with micro-organisms—bacteria, fungi

D6124-11
Indicates that the product meets ASTM standards for residual powder on medical gloves, ?10mg/dm2.

D6978-05
Indicates that the product meets ASTM standards for resistance of medical gloves to permeation by at least 9 chemotherapy drugs. A more stringent and specialised test than the EN374 test.

F1671
Indicates that the product meets ASTM standards for resistance of materials to penetration by blood-borne pathogens.

Features:
Non latex, powder-free high quality nitrile rubber, tailored fit
Industrial/medical grade, FDA approved
Paint, silicone, oil and abrasion resistant
Textured fingertips for advanced grip
24cm cuff length
4mil thickness
Superior puncture and abrasion resistance
Latex free, 100% Nitrile
100pc/box
Sizes S–2XL

Uses:
Industrial
Laboratory
Automotive
Medical
Cleaning
Printing
Painting

Certifications:

EN 420:03+A1:09
General requirements for protective gloves.

EN 1186
Glass/fork symbol gives traceability and identification of materials intended to come into contact with food. Confirms that these products will not contaminate food with hazardous substances.

EN 455-2
Defines requirements for sizing and strength of disposable gloves for medical use.

EN 455-3
Defines requirements for biological evaluation of disposable gloves to check that irritancy and powdering is within limits for medical use.

FDA 21
Overarching regulations for production, testing, labelling and advertising of food and drugs within the United States.

CFR 177.2600
Rubber articles intended for repeated use—lists permitted elastomers, vulcanization materials, accelerators, retarders, activators, antioxidants, plasticizers, fillers, emulsifiers, and other additives, and sets extraction limits for food contact.

EN 374-1
Indicates that the product meets permeation standards for protective gloves, with permeation resistance of (Type A) at least 30 minutes to 6 test chemicals, (Type B) at least 30 minutes to 3 chemicals and (Type C) at least 10 minutes to 1 chemical. Letters under the shield identify the chemicals.

EN 374-2
Indicates that the product meets penetration standards for protective gloves, against penetration by dangerous chemicals and micro-organisms. A sample glove shall not leak water or air when tested for closures, porosity, seams, pinholes, leaks or imperfections of the glove by either inflating with air or filling with water.

EN 374-4
Measures the glove’s resistance to degradation by chemical exposure—any flaking, swelling, disintegration, embrittlement, hardening, softening, etc—by testing the force required to puncture the glove material after continuous contact with a challenge chemical.

EN 374-5
Tests the glove for safety in risks of contact with micro-organisms—bacteria, fungi

D6124-11
Indicates that the product meets ASTM standards for residual powder on medical gloves, ?10mg/dm2.

D6978-05
Indicates that the product meets ASTM standards for resistance of medical gloves to permeation by at least 9 chemotherapy drugs. A more stringent and specialised test than the EN374 test.

F1671
Indicates that the product meets ASTM standards for resistance of materials to penetration by blood-borne pathogens.

Features:
Non latex, powder-free high quality nitrile rubber, tailored fit
Industrial/medical grade, FDA approved
Paint, silicone, oil and abrasion resistant
Textured fingertips for advanced grip
24cm cuff length
4mil thickness
Superior puncture and abrasion resistance
Latex free, 100% Nitrile
100pc/box
Sizes S–2XL

Uses:
Industrial
Laboratory
Automotive
Medical
Cleaning
Printing
Painting

Certifications:

EN 420:03+A1:09
General requirements for protective gloves.

EN 1186
Glass/fork symbol gives traceability and identification of materials intended to come into contact with food. Confirms that these products will not contaminate food with hazardous substances.

EN 455-2
Defines requirements for sizing and strength of disposable gloves for medical use.

EN 455-3
Defines requirements for biological evaluation of disposable gloves to check that irritancy and powdering is within limits for medical use.

FDA 21
Overarching regulations for production, testing, labelling and advertising of food and drugs within the United States.

CFR 177.2600
Rubber articles intended for repeated use—lists permitted elastomers, vulcanization materials, accelerators, retarders, activators, antioxidants, plasticizers, fillers, emulsifiers, and other additives, and sets extraction limits for food contact.

EN 374-1
Indicates that the product meets permeation standards for protective gloves, with permeation resistance of (Type A) at least 30 minutes to 6 test chemicals, (Type B) at least 30 minutes to 3 chemicals and (Type C) at least 10 minutes to 1 chemical. Letters under the shield identify the chemicals.

EN 374-2
Indicates that the product meets penetration standards for protective gloves, against penetration by dangerous chemicals and micro-organisms. A sample glove shall not leak water or air when tested for closures, porosity, seams, pinholes, leaks or imperfections of the glove by either inflating with air or filling with water.

EN 374-4
Measures the glove’s resistance to degradation by chemical exposure—any flaking, swelling, disintegration, embrittlement, hardening, softening, etc—by testing the force required to puncture the glove material after continuous contact with a challenge chemical.

EN 374-5
Tests the glove for safety in risks of contact with micro-organisms—bacteria, fungi

D6124-11
Indicates that the product meets ASTM standards for residual powder on medical gloves, ?10mg/dm2.

D6978-05
Indicates that the product meets ASTM standards for resistance of medical gloves to permeation by at least 9 chemotherapy drugs. A more stringent and specialised test than the EN374 test.

F1671
Indicates that the product meets ASTM standards for resistance of materials to penetration by blood-borne pathogens.

Related Products