Silver S. Annular Cutter
Description
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1225
Hole Diameter: 12mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1325
Hole Diameter: 13mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1250
Hole Diameter: 12mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1350
Hole Diameter: 13mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1450
Hole Diameter: 14mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1425
Hole Diameter: 14mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1625
Hole Diameter: 16mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1650
Hole Diameter: 16mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1725
Hole Diameter: 17mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description: M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1750
Hole Diameter: 17mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1825
Hole Diameter: 18mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS1850
Hole Diameter: 18mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2025
Hole Diameter: 20mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2050
Hole Diameter: 20mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2225
Hole Diameter: 22mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2250
Hole Diameter: 22mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2425
Hole Diameter: 24mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2450
Hole Diameter: 24mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2525
Hole Diameter: 25mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2550
Hole Diameter: 25mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2625
Hole Diameter: 26mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2650
Hole Diameter: 26mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2825
Hole Diameter: 28mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS2850
Hole Diameter: 28mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS3025
Hole Diameter: 30mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS3050
Hole Diameter: 30mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS3225
Hole Diameter: 32mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS3250
Hole Diameter: 32mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
25mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS4025
Hole Diameter: 40mm
Depth of Cut (DOC): 25mm
Pilot Pin Diameter: 6.35mm (Use code SP16003)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
UNIVERSAL SHANK
50mm Depth Metric ‘Silver Series’ Annular Cutters
Brand: HOLEMAKER
Part Number: AS4950
Hole Diameter: 49mm
Depth of Cut (DOC): 50mm
Pilot Pin Diameter: 6.35mm (Use code SP16004)
Shank Diameter: 3/4in | 19.05mm
Description:
M2AL HIGH SPEED STEEL MATERIAL
M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.
STEP HARDENED PROCESS
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters.
MULTI-CUT GEOMETRY
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centering.
FULLY GROUND WITH INTERNAL RELIEF
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.
UNIVERSAL SHANK
19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.