Come in and see us at 20 King Street East, Te Kuiti and 10 Wahanui Crescent, Otorohanga

Safe-Eyes Safety Goggles
  • Safe-Eyes Safety Goggles
  • Safe-Eyes Safety Goggles
  • Safe-Eyes Safety Goggles
  • Safe-Eyes Safety Goggles

Safe-Eyes Safety Goggles

Stock Code:
SE 003
Stock Code:
SE 002
Stock Code:
SE 001
Stock Code:
SE 004
$42.50
$42.50
$42.50
$42.50
Stock Level
In Stock
In Stock
In Stock
In Stock
In Stock

Add To Cart

Unavailable for Online Purchase: Contact store for availability
Unavailable for Online Purchase: Contact store for availability
Unavailable for Online Purchase: Contact store for availability
Unavailable for Online Purchase: Contact store for availability
Add to Favourites
Add to Favourites
Add to Favourites
Add to Favourites
(0 reviews)

Description

Dimensions

0.3 mm ligatures
0.7 mm hole
0.3 mm material thickness
56.20 grams weight

Mesh hole size differences
FINE: 0.35 mm
Safe-Eyes Fine Mesh

STANDARD: 0.7 mm
Safe Eyes Standard Mesh

Now AS/NZS 1337.2:2012 safety standard approved!

Safe Eyes® mesh goggles have passed the UK standard BS EN 1731:2006 and USA standard ANSI Z87.1.2010 (basic impact) CE mark approved. With lenses manufactured from stainless steel mesh SAFE-EYES™ will not fog up. They are designed to be comfortable to wear for long periods. SAFE-EYES™ can be used in a wide range of applications including; power tool operation, construction activities, when operating outdoor plant and equipment such as chainsaws or line trimmers, for mining and quarrying activities, for motor biking, timber works and woodcraft, etc…

Storage
When stored and maintained at ambient temperatures, this product will last in excess of two years, but must be inspected thoroughly prior to use.

Any product showing signs of deterioration or damage should be replaced.

Fitting
Check for damage and broken parts prior to use. Broken parts must only be replaced by a competent person.
Position the SAFE-EYES™ product over the eyes, securing with the strap piece.
Pull the strap retaining clip (green) forward and adjust the strap to ensure the SAFE-EYES™ are secure, re-position the clip.
Note that there should be no gap between the product frame and the face.

Cleaning
Wash in warm soapy water and rinse with clean water. Allow the product to dry naturally, do not force dry.

Disinfection
Disinfect when necessary using a mild household or medical detergent, rinse thoroughly with clean water. Allow the product to dry naturally, do not force dry.

Warning
This product intended for protection against fine to medium particles.
This product is not intended to give protection from ultra-violet or infrared radiation, including sunlight.
This product does not protect against molten metal, hot solids or electrical hazards.

Dimensions

0.15 mm ligatures
0.40 mm hole
0.25 mm material thickness
56.20 grams weight

Mesh hole size differences
FINE: 0.35 mm
Safe-Eyes Fine Mesh

STANDARD: 0.7 mm
Safe Eyes Standard Mesh

With lenses manufactured from stainless steel mesh SAFE-EYES™ will not fog and are designed to be comfortable to wear for long periods. SAFE-EYES™ can be used in a wide range of applications including; power tool operation, construction activities, when operating outdoor plant and equipment such as chainsaws or line trimmers, for mining and quarrying activities, for motor biking, timber works and woodcraft, etc…

Safe Eyes® fine mesh goggles have passed the USA standard ANSI Z87.1.2010 (basic impact).

Storage
When stored and maintained at ambient temperatures, this product will last in excess of two years, but must be inspected thoroughly prior to use.
Any product showing signs of deterioration or damage should be replaced.

Fitting
Check for damage and broken parts prior to use. Broken parts must only be replaced by a competent person.
Position the SAFE-EYES™ product over the eyes, securing with the strap piece.
Pull the strap retaining clip (green) forward and adjust the strap to ensure the SAFE-EYES™ are secure, re-position the clip.
Note that there should be no gap between the product frame and the face.

Cleaning
Wash in warm soapy water and rinse with clean water. Allow the product to dry naturally, do not force dry.

Disinfection
Disinfect when necessary using a mild household or medical detergent, rinse thoroughly with clean water. Allow the product to dry naturally, do not force dry.

Warning
This product intended for protection against fine to medium particles.
This product is not intended to give protection from ultra-violet or infrared radiation, including sunlight.
This product does not protect against molten metal, hot solids or electrical hazards.

Dimensions

0.3 mm ligatures
0.7 mm hole
0.3 mm material thickness
56.20 grams weight

Mesh hole size differences
FINE: 0.35 mm
Safe-Eyes Fine Mesh

STANDARD: 0.7 mm
Safe Eyes Standard Mesh

Now AS/NZS 1337.2:2012 safety standard approved!

Safe Eyes® mesh goggles have passed the UK standard BS EN 1731:2006 and USA standard ANSI Z87.1.2010 (basic impact) CE mark approved. With lenses manufactured from stainless steel mesh SAFE-EYES™ will not fog up. They are designed to be comfortable to wear for long periods. SAFE-EYES™ can be used in a wide range of applications including; power tool operation, construction activities, when operating outdoor plant and equipment such as chainsaws or line trimmers, for mining and quarrying activities, for motor biking, timber works and woodcraft, etc…

Storage
When stored and maintained at ambient temperatures, this product will last in excess of two years, but must be inspected thoroughly prior to use.

Any product showing signs of deterioration or damage should be replaced.

Fitting
Check for damage and broken parts prior to use. Broken parts must only be replaced by a competent person.
Position the SAFE-EYES™ product over the eyes, securing with the strap piece.
Pull the strap retaining clip (green) forward and adjust the strap to ensure the SAFE-EYES™ are secure, re-position the clip.
Note that there should be no gap between the product frame and the face.

Cleaning
Wash in warm soapy water and rinse with clean water. Allow the product to dry naturally, do not force dry.

Disinfection
Disinfect when necessary using a mild household or medical detergent, rinse thoroughly with clean water. Allow the product to dry naturally, do not force dry.

Warning
This product intended for protection against fine to medium particles.
This product is not intended to give protection from ultra-violet or infrared radiation, including sunlight.
This product does not protect against molten metal, hot solids or electrical hazards.

Dimensions

0.15 mm ligatures
0.40 mm hole
0.25 mm material thickness
56.20 grams weight

Mesh hole size differences
FINE: 0.35 mm
Safe-Eyes Fine Mesh

STANDARD: 0.7 mm
Safe Eyes Standard Mesh

With lenses manufactured from stainless steel mesh SAFE-EYES™ will not fog and are designed to be comfortable to wear for long periods. SAFE-EYES™ can be used in a wide range of applications including; power tool operation, construction activities, when operating outdoor plant and equipment such as chainsaws or line trimmers, for mining and quarrying activities, for motor biking, timber works and woodcraft, etc…

Safe Eyes® fine mesh goggles have passed the USA standard ANSI Z87.1.2010 (basic impact).

Storage
When stored and maintained at ambient temperatures, this product will last in excess of two years, but must be inspected thoroughly prior to use.
Any product showing signs of deterioration or damage should be replaced.

Fitting
Check for damage and broken parts prior to use. Broken parts must only be replaced by a competent person.
Position the SAFE-EYES™ product over the eyes, securing with the strap piece.
Pull the strap retaining clip (green) forward and adjust the strap to ensure the SAFE-EYES™ are secure, re-position the clip.
Note that there should be no gap between the product frame and the face.

Cleaning
Wash in warm soapy water and rinse with clean water. Allow the product to dry naturally, do not force dry.

Disinfection
Disinfect when necessary using a mild household or medical detergent, rinse thoroughly with clean water. Allow the product to dry naturally, do not force dry.

Warning
This product intended for protection against fine to medium particles.
This product is not intended to give protection from ultra-violet or infrared radiation, including sunlight.
This product does not protect against molten metal, hot solids or electrical hazards.

Related Products